So I found the ZE-NC2011 on the Zenec site. So I found the ZE-NC2011 on the Zenec site. You can easily update software from software but only. ZE-NC2010 Installation Guide Software Update Preparation: -Carefully read the entire installation guide and keep it nearby for reference. -You need the latest device-specific ZENEC update-set, which consist of three USB-sticks. The update preparations are described in a separate „preparations for.

Hey guy's, I bought an Opel Corsa recently and it came with a Zenec 5010 navigation system build in. It has never been updated so I just spent an hour doing 'legal' software updates. The thing is from 2010, but the maps are ofcourse far outdated. How do I go about this?

Someone told me it runs on igo8 software. I downloaded some stuff already, but it won't load anything unless it comes from a USB with the official synctool on it. Can I import the recent maps inside the synctool or anything? I spent a lot of money on the car, I don't want to spent more, just to get my GPS going. Thanks in advance! I used to have the Zenec ZE-MC2000 (head unit) ZE-NA2000N (navigation bolt on) in my Golf and successfully upgraded the original iGO8 to Primo. The root of the SD Card had 4x Folders • backup • gpslog • MobileNavigator • Naviextras Inside the MobileNavigator, I had to rename the 'Primo.exe' file to 'MobileNavigator.exe' in order for the unit to detect the software.

I cannot remember if this is relevant at all, but the data.zip had the following: inside config devices!aliases.ini the following lines were added. Download manual receptor zinwell zdx 7000. Info_names='ACR-ZENEC ZE-MC2000' [gps] port=1 baud=9600 [interface] show_exit=0 skin='ui_igo8'; Workaround for voice distortion of the MC2000 device recalc_voice=0 [modules] IEXTERNAL_BACKGROUND_PLAYBACK_MANAGER='ACR_EXT_BGPLAYBACK_MGR' [rawdisplay] driver='GDI' screen_x=480 screen_y=234 [sound] ding=2 use_method=1 queue_length=200 voice_volume=64 Only thing I can think of is putting this onto a SD card and putting into the SD slot on the unit. Hope it helps. Apologies, have now noted that you need to use the 'SynTool' from Zenec's website. You are not allowed to view links. Just looking through the ini files and examples on the PDF's - it appears that anything that is copied onto the USB Stick and then /Navigation is copied onto the unit (with the software being renamed to 'navigation.exe').

Are you able to register your unit on You are not allowed to view links. And upload one of the software update zip files on this site?

If so, then we could take a look and work out what can be changed to update Not sure if anyone else can shed any light but note that any alterations are done at your own risk.

ZE-NC2010 Installation Guide Software Update - ZE- NC2010 Installation Guide Software Update Preparation: -Carefully read the entire installation guide and keep it nearby for reference. -You need the latest device-specific ZENEC update-set, which consist of three USB-sticks. The update preparations are described in a separate „preparations for update“ guide (recommended read for fist-time updaters). -If you are going to prepare the USB data carriers yourself make sure they are FAT32 formatted, if that isn’t the case you need to reformat and copy the necessary files again (see above mentioned prep guide). Important information: • Do not disconnect the device from the power supply during transfer communication of the updates.

Also make sure that it doesn’t get coincidentally disconnected. • It’s mandatory to closely follow this installation guide step-by-step. Even a small deviation may render your precious device permanently unusable. • Do not unplug your USB data carrier during the update process.

• Do not use any updates which are not expressively certified for your ZE- NC2010 (i.e. No updates from similar models). If you deviate from these step-by-step instructions, you will void your warranty and risk to brake your device.

In that case ZENEC will not take any responsibility. Installation of the firmware updates: The update software consists of three parts on three USB-sticks i.e. MCU, MPEG, application and IPod update. Make absolutely sure that you install the separate software parts following the below mentioned installation sequence: 1. Application Caution: Ensure your cell phone is switched off during the entire update process – any bluetooth activities, as bluetooth coupled phones receiving incoming calls, are prone to fatally interrupt the update process.